Pipe Bending Made Easy

Pipe BenderBending pipes using the right pipe bender is not so difficult, but it can be for someone using the tool for the first time. If you own one of those cool Baileigh pipe benders for sale and are new with the bending techniques, the following pointers from JMC Equipment can help you master the art:

The Details

It is essential that you are keen when bending your pipes. Take your time to mark your tubes correctly and position the pipe well. Pipes that are incorrectly bent are not as effective in functionality and will cost you.

Bending Light Materials

Light materials are likely to crimp in their bent form. You can get a firm structure to prevent this occurrence. Add water to your tube and then follow with sand. Give the tube a gentle tap to let the sand further into the tube. Any bubbles will come out as you do this and the result is a firm structure that will not crimp after bending.

Make Room for Spring Back

Any pipe will experience spring back after bending. To get the perfect bend, you should bend your tube a little more. Estimate the spring back and include it in the bending allowance. You should be precise with your measurements as it is hard to undo a bent pipe.

Take Measurements Correctly

You will need to secure one end of the pipe when bending. Therefore, you should take your measurements from the center of the pipe to avoid miscalculations. If you are using a hydraulic pipe bender, make sure the size of the bender and former roller are exact for the size of pipe you are handling.

Practice makes perfect, and bending pipes is no exception. The more you use a pipe bender, the more you become an expert in the art of bending pipes. Investing in a good pipe bender is also key to getting the right form faster.