Oil: How Should People Transport It?
People have come a long way in terms of transportation, not only for aiding people’s travels, but also for moving materials too heavy or too toxic for a single person to handle.
Even then, no mode of transportation is flawless, and when too heavy and too toxic do not even begin to describe the material in need of transport — oil, decisions can quickly turn from the logistical to the moral.
Disregard the seemingly perpetual conflict tied with the oil industry, the most notable of which (for now) is the resource struggle in the Middle East, between ISIS and everyone else, and you still have a significant problem on your hands with oil transport.
Whether it is an oil pipeline in Syria or Missouri, running a tube over multiple territories proves to be a very risky move, yet pays off extremely well. In fact, about 58 percent of all oil deliveries made worldwide is by pipeline, and The Wall Street Journal says that it is indeed the quickest and cheapest way to move crude. On the subject of safety, however, leaky underground pipelines can severely damage terrestrial ecosystems, though those in water undeniably have had it worse.
Pipelines could drip no amount of crude; transportable tank trucks could spill no amount of diesel, which could cause an environmental catastrophe even remotely comparable to those that happened at sea.
With barges transporting the second largest share of oil (37 per cent) across the world’s waters, every trip does run the risk of killing entire populations of sea life within days, but it is a risk companies have to take in order to maximize utility from the oil fields they are finding increasingly difficult locate and secure.
Perfecting the way people transport oil may not come before humanity outgrows its dependency on the resource. For now, the best thing that industries can do is minimize the risk involved in their two most used modes of transport: pipelines and barges.
3 Common Event Planning Fails You Should Avoid
The success of an event usually falls in the hands of the event planner or whoever is tasked to manage and organize it. While it’s common to forget or miss out something during preparations, not realizing it sooner will ruin all your hard work later on.
Luckily, there’s a way for you to counteract the chances of such fails and errors. Here are the most common event planning mistakes and some ways to thwart them:
Failure to Allocate Resources Properly
- The Issue: Event staffing is one of the most critical yet improperly managed resources. Not knowing how to make the most of each skillset available may affect the flow of your event.
- The Solution: Event managers need to understand the potential of each staff and use it to their own advantage to maximize the work they can fulfill. Thorough assessment can lift up a huge portion of the workload, as well as avoid possible confusion.
Overlooking the Murphy’s Law
- The Issue: No matter how much you prepare, problems will still appear.
- The Solution: Always have a risk management or a backup plan. This is the only way to manage the situation effectively without major damages or losses.
Not Following the Standard Management Processes
- The Issue: This is probably the most common mistake event planners commit. They often jump from one stage to another, rather than following the order. While there’s nothing wrong with it, without proper tracking or monitoring, you may quickly skip the important things.
- The Solution: The most efficient way to tackle and manage every task is to have a checklist that indicates the status of everything in the event. Whether you’re planning to request for a third-party service from party rental companies in Minneapolis, be sure to update your tracker to avoid confusion and repetition of tasks.
Keep these things in mind to overcome possible failures as you plan your next event. Make your objectives clear and have a checklist, summarizing everything to monitor the progress of your preparations. When everything’s settled, you’re off to a good celebration.
3 Effective Ways to Find Fulfilment in Life
Finding fulfilment is one of the most important things you can do in life. Being fulfilled with your life, who you are, and what you’re doing will bring you and the people around you happiness. There may come a point when you don’t find fulfilment in things you do, but having the desire to find it is still a good place to start.
Here are some things you can do to find fulfilment in your life and live to the fullest:
Sometimes, you get more when you give more. Fulfilment for some people is making an impact in other people’s lives. One of the best ways to give back is through volunteerism. By giving some of your precious time, effort, money, and energy to something bigger than you, you can find fulfilment. Look for a volunteer opportunity that speaks to your heart and sign up to be part of a grander cause. There is certainly fulfilment when you know you’ve helped people in need through your small acts of kindness.
Count Your Blessings
Sometimes, the only problem is that you don’t acknowledge just how blessed you currently are. When you start counting your blessings, you will suddenly appreciate everything that has been given to you and every privilege you have. That can help you find fulfilment in your life and urge you to make the most out of it. Even if you’re going through a tough situation, there are still plenty to smile about.
Learn to Meditate
Meditation is a wonderful way to relax your restless mind, be more in touch with your emotions, and live a more mindful life. Learning how to meditate early in the morning or before going to sleep (or both) can help you find more fulfilment in life because it declutters your brain and recharges your soul. It will enable you to take control of your life and let go of things you can’t control.
Follow these hacks and you’ll surely be a more fulfilled version of yourself.
The Basics of the API 653 Standard from a Job Perspective
The American Petroleum Institute developed the API 653 Standard to serve as a guideline on the inspection, repair and reconstruction of steel aboveground storage tanks among other aspects.
API’s first edition of the standard for the petroleum and chemical industries became published in January 1991. Steel storage tanks manufactured in compliance with API 650 and API 12C standards are the focus of API 653.
Those who wish to establish a career as an API 653 inspector can also apply provided they meet the institute’s criteria.
A possible career as an aboveground storage tank inspector depends on your level of experience and education. For those who graduated with a bachelor’s degree in engineering or technology, API requires at least one year of experience in supervision or performance of inspection activities.
High school graduates can apply if they have at least three years of experience in the design, construction and other related tasks. People with no formal education can submit an application as well, given that they have at least five years of experience in various functions.
The qualifications for the job aligns with the API 653 Aboveground Storage Tank Inspector Certification Program, which helps states and local governments in regulations concerning aboveground tanks. Those who successfully land a job should also be certified and renew their license every three years.
An API report for the week ended Oct. 21 claimed that U.S. crude stocks increased by 4.8 million barrels during the period. Following the report’s release, crude prices dropped below $50 per barrel in post-settlement trade.
Oil prices also decreased as producers have voiced opposition to the Organization of the Petroleum Exporting Countries’ plan to downsize oil production. However, some countries like Iraq remained adamant that it will not cut its output.
The OPEC is scheduled to finalize the production controls at a Nov. 30 meeting in Vienna, Austria.
Invest in Gold Coins and Get High Rates of Return
Investing in gold coins and bullion is slowly starting to overtake major mainstream investment opportunities. The reason for this, perhaps, is that gold provides a strong protection against inflation and the unstable global economic scene.
There are many types of investments ranging from portfolio to land and car ownerships. There are even instances when novelty items that mark significant events are considered investments because their value may increase at some future point. The value of these types of investments, however, is largely determined by the collective belief of society that they must be valuable. This means that as soon as the belief erodes, the thing loses its value. This is not the case with gold coin investment, as Atkinsons Bullion explains below.
While the collective belief principle may also apply to gold, it has been regarded as a valuable object since the early Sumerian civilisation. They have been used as ornaments, medicine, payment mediums, rewards, symbols of power, and much more. According to the Ancient History Encyclopedia, because of the rarity and appealing qualities of gold, ruling classes of ancient cultures made it their symbol of position and power. This is perhaps why archaeologists usually find hordes of gold objects in burial places of rulers and important personages in ancient history.
The Gold Coin
The exact era when gold coins began to be used as monetary exchange cannot be accurately pinpointed. Nevertheless, archaeologists, based on the evidence they unearthed, marked its beginning as between 700 to 500 B.C. Historical records made available by Gold.org show that during the 1920s, the circulation of gold coins was gradually reduced until it was fully withdrawn in 1930.
A Worthy Investment
Today, gold coins in the form of sovereigns and krugerrands are still produced with values based on current gold prices. Investing in gold coins is a wise decision, particularly in times of economic uncertainties where values of portfolio investments, as well as real properties like land and buildings, could suddenly drop without warning. In fact, it is for these very reasons that gold coins in the UK are making their presence felt once again. The restless economic and global financial landscape is fueling the rise of in gold coins investment.
Investing in gold coins and bullion is a profitable endeavour that could give you huge profits. The high rate of return on this type of investment is so attractive that people around the world are starting to notice. Who knows, this might just be the investment you can retire on.
How to Properly Clean and Care for Reclaimed Wood Products to Make Them Last a Lifetime
To describe simply, reclaimed wood is just wood with a history to tell, and being used for a new purpose. It might be an old barn in the past that was milled and transformed into reclaimed hardwood floor, or it could have been a humble storage crate. Some reclaimed wood materials can be re-engineered to make them look brand new.
Following are some tips on how to properly clean, as well as take good care of your furniture made from reclaimed wood products to make sure that they last long enough for your children’s grandchildren to enjoy:
Always Use a Damp Piece of Cloth
Prolonged exposure to water can damage the reclaimed wood materials in your furniture. Refrain from using a heavily saturated cloth to clean the surfaces. Just use a piece of damp cloth to get rid of spills and other water-related issues. As much as possible, immediately clean spills to prevent them from causing damage.
Avoid Silicone and Ammonia-Based Cleaning Products
Cleaning products that contain silicone and those that are ammonia-based contain a lot of chemicals that can irritate and damage the reclaimed timber materials. To clean your furniture, just follow the tips provided in the previous section.
Avoid Heat and Direct Sunlight
High heat and direct sunlight can cause warping and cracking issues with the wood furniture. These will adversely affect the life of the wood product. Avoid placing the furniture in parts of your house where they will be exposed to direct sunlight and high heat such as an open fire.
Each piece of furniture made from reclaimed wood has its own interesting, unique story to tell. Do not allow these stories to end with you. By following the cleaning and care techniques provided in this post, you can help make sure that these stories will remain intact, and live on, for the future generations to enjoy.
Unusual Practices for More Successful and Creative Meetings
Most business leaders have their own way of keeping their top managers motivated and involved in the most important aspects of decision-making. Many of them have a unique approach to doing this. The most effective managers and CEOs even have a different approach to meetings, which are notoriously boring and usually ineffective when done in the traditional ways.
Here are some suggestions to help you shake up those meetings that are generally known to waste time, money, and opportunities:
Don’t meet too often
Traditional leaders usually meet their managers at least once a week, creating a routine that quickly becomes mind-numbing for the participants. What’s even worse is when it’s the same faces all the time, so that even when you have nothing to contribute to the topic, you are sitting there fighting sleep. The meetings can extend from the start of the day to lunch or even beyond.
Avoid such snorefests. Meet only when necessary, and call only the managers that are involved in the agenda. Managers shouldn’t tag along an assistant or subordinate unless warranted. If someone comes who does not have anything to contribute, you can politely ask the person to leave. Odds are good that person would be relieved too. Don’t dwell on the same topics you had the last time unless your meeting is about progress reports. Discourage rehashing because this will waste your time.
Meet in unusual places
To prevent boredom, shake up the boardroom now and then. For example, schedule a meeting well in advance and send a note for the team to meet you at a Vail ski rental. You can spend some time enjoying the slopes before you get down to business. Such exhilaration and fun can encourage creative thinking, especially because it’s done away from the office. Of course, if you schedule such meetings now and then, you should have at least the day to spend.
Set a time limit
If you’re doing a regular meeting, at least set a time limit. This will help you avoid rehashing and being sidetracked. In most meetings, when someone starts an office gossip, most of the time will be eaten up discussing that gossip. Discourage this activity with a timer. When the timer goes off, you should all be on your way out the door.
In some companies, instead of doing the meeting face to face, the participants use technology instead. This will save you time and money, especially if your managers are coming from satellite offices or branches.
Meetings are important, but they can harm your company if they are nothing but a time-wasting routine. Be creative, and remember that time is money. Make your meetings fast, interesting, and productive.
Make your move Hassle Free with these Helpful Tips
Leaving your old home to move into a new one is bittersweet. Memories would be left behind, but new ones will also be created. Aside from your sentiments, you also have to deal with the real dilemma of finding the right moving company in Salt Lake City like Mergenthaler Transfer and Storage to help you do the job.
Make your move easier and more hassle free with these helpful tips.
Helpful points to remember:
- Move only what you NEED
Only bring things that you REALLY need. How would you know if you still need that pair of shoes? Simple. If you have survived your everyday life for 3-5 years, chances are you won’t need that thing and is good to be given or thrown away. There are different organizations that could benefit from your pre-loved stuff.
- Avoid last minute packing
It is human nature to cram. Not only in school, but also in packing. So in order to avoid the stress, pack early. Start with your clothes and slowly move on to other things like your kitchen appliances. When moving day comes, you will be surprised at how little you need to pack left.
- Know the policy of the place you are moving to
This applies to people who are moving into flats or apartments. Different flats have different policies and it will be helpful to know this ahead of time so as not to cause you and the moving company unnecessary problem.
- Be with the right moving company
Now that you have finished sorting and packing, choosing the right moving company is essential. The best way to do so is through referrals from friends and families who have availed the services.
Have accredited moving companies that are able to provide you with Workman’s Compensation Certificate. This certificate serves as an insurance that will protect you from legal action should a worker get hurt while working. It is advisable to choose moving companies that could provide you with this insurance.
Moving is not as hard as you imagined it to be. You just need the right tips and the right people to help you!
Three Vital Processes for Effective Water Clarification
Most of the water that flows into our homes contains various contaminants either in soluble or insoluble form. The soluble contaminants are usually minerals the water absorbs or dissolves as it flows. The insoluble contaminants include dust, soil, and leaves. The larger insoluble particles are easier to remove from the water through filtration, unlike the fine particles.
Often, fine particles found in surface repel each other since most of their surfaces are negatively charged. To separate the particles, the water has to go through a clarification process. The pros from ashtuck.com share that the entire clarification process may include coagulation, sedimentation, and flocculation and is known as conventional clarification. Clarification process removes all kinds of sediments, organic matter, particles, and colour.
Coagulation involves the addition of iron or aluminium salts. These salts neutralise the negative charge on particles and hydrolyze the insoluble precipitates. Water-soluble organic polymers that contain ionised sites can also effect coagulation.
During flocculation, the decentralised particles during coagulation aggregate to form large precipitates through slow and gentle mixing. Flocculation takes about 45 minutes and takes place in different compartments. The mixing speeds vary with the basins and often as water flows from the top to bottom of the basin the speed decreases.
After flocculation, the agglomerated particles enter a clarifier unit. The particles then float are removed through sedimentation or are skimmed from the surface. Through sedimentation, most solids settle by gravity. Sedimentation occurs in circular or rectangular basins that contain inclined basins which increase the surface area for sedimentation, making the process more effective. Filtration then removes the remaining materials.
For an effective water clarification process, it is good to acquire quality clarifier or thickener units from leading water treatment equipment suppliers. Your clarifier like any other machine will need regular maintenance to keep performing its role. In case you need to renovate an old thickener or clarifier, a retrofit drive unit is a suitable and economical solution.